How to Clean Copper Pots and Pans

How to Clean Copper Pots and Pans


Cleaning copper pots and pans can be a real struggle sometimes, especially when they are covered in rusty oil and food leftovers. Now, you shouldn’t be worried since we are going to explain widely how to clean copper pots and pans with ease.

Simply speaking, you will get everything you need to know here explained step-by-step in order to get your copper pots and pans cleaned in no time. Let’s begin.

Clean Copper Pots and Cans – 6 Easy Steps

Before you start doing these steps, it is important to prepare the pot or the pan for cleaning. This usually takes no longer than a minute, since all you have to do is to water it down a few times. Now, let’s start.

1) Coat the pan or the pot in the salt

The first thing you want to do is to put the pan or the pot in the sink and coat it in salt. Simply put it down there and pour some salt on it. This way your pot or the pan will be exposed to salt which is what we need to move on to the next step.

2) Put some white wine vinegar on top of the salt

Now, all you need to do is to find a bottle of white wine vinegar and pour it directly into the areas where you already applied salt. However, you don’t need to use all the bottle, just pour some amount over and the process of cleaning will start.

Also, don’t forget to put some more salt over the vinegar that you already poured on the pan or the pot. This will ensure that you can move to the third step.

3) Leave for a couple of seconds, no longer than 15 seconds

All you need to do now is to leave the already pored pan or the pot in the sink to clean itself basically. The recommendable time is around 15 seconds since that way you will let salt and vinegar to clean your pan or the pot properly.

Also, you can watch the whole chemical process of dissolving, it’s quite interesting.

Copper Pots and Pans

4) Sponge time

Now, after you did everything correctly, it is time to take the sponge in your hands and do the rest of the job. The key thing here is to take the sponge and pour some vinegar on it.

This way, you will ensure that the chemicals that you already used will do the correct job and you will get your pot or the pan cleaned.

Anyhow, you need to do a little scrubbing here since it requires a little bit of effort too.

5) Add the salt in the process

If you need to, you can always add more salt, especially on the sides of the pan or the pot. As we all know, the sides can be a little bit tricky to clean.

6) Rinse

After you did everything properly, it is time to rinse off the pan or the pot. You are done now and your pot or the pan will most likes be as good as new.


Having a dirty pan or the pot is no longer a problem if you put a little bit of effort and time to clean it. We explained all the steps widely and the only thing left to do is to proceed with the cleaning. The success is guaranteed.